Table of Contents
Advertisement
8B-14 LIGHTING SYSTEM
Headlight Leveling Actuator On-Vehicle
Inspection
1) Make sure all headlight couplers and leveling actuator cou-
plers are correctly connected.
2) Turn the ignition switch to ON position.
3) Check if the leveling actuator sounds slightly while the level-
ing switch is moved.
If no sound is heard with the movement of the leveling
switch, check headlight leveling switch and wiring.
If headlight leveling switch and wiring are OK, replace head
light housing.
4) Make sure the replaced leveling actuator operates correctly
after replacement.
Dimmer/Passing Switch Removal and Instal-
lation
Dimmer/passing switch is incorporated in the turn signal switch.
Refer to "Turn Signal Switch Removal and Installation" in this sec-
tion for removal and installation of the dimmer/passing switch.
Dimmer/Passing Switch Inspection
Check the continuity at each switch position. If any correct conti-
nuity is not obtained, replace turn signal switch.
Dimmer/passing switch specification
Terminal
Switch Position
Passing (PASS)
Low Beam (LO)
High Beam (HI)
ED
HL
HU
HF
Advertisement
Table of Contents
