Table of Contents
Advertisement
7C1-10 CLUTCH
3) Pull out input shaft bearing (1) from using the following spe-
cial tools.
Special tool
(A) : 09921-26020
(B) : 09930-30104
2. Flywheel
Installation
NOTE:
Before assembling, make sure that flywheel surface and
pressure plate surface have been cleaned and dried thor-
oughly.
1) Install flywheel (1) to crankshaft and tighten bolts (2) to spec-
ified torque.
Special tool
(A) : 09924-17810
Tightening torque
Flywheel bolts (a) : 70 N·m (7.0 kg-m, 50.5 lb-ft)
2) Using special tool, install input shaft bearing to flywheel.
Special tool
(B) : 09925-98210
Advertisement
Table of Contents
