Table of Contents
Advertisement
8D-10 WINDOWS, MIRRORS, SECURITY AND LOCKS
1
+
-
2
3
4
Rear Window Defogger Wire Repair
1) Use white gasoline for cleaning.
2) Apply masking tape (1) at both upper and lower sides of heat
3) Apply commercially-available repair agent (3) with a fine-tip
4) 2 to 3 minutes later, remove masking tapes (1).
5) Leave repaired heat wire as it is for at least 24 hours before
• Damage point locating.
a) Turn ignition switch ON.
b) Turn defogger switch ON.
c) Touch voltmeter positive (+) lead to heat wire positive ter-
minal end (1).
d) Touch voltmeter negative (–) lead with a foil strip to heat
wire positive terminal end (1), then move it along wire to the
negative terminal end (2).
e) The place where voltmeter fluctuates from 0 – 2 V (3) to
several volts (4) is where there is damage.
X: Damage point
wire (2) to be repaired.
brush (4).
operating rear defogger again.
Advertisement
Table of Contents
