Table of Contents
Advertisement
10B-68 AIR BAG SYSTEM
3
2
AIR BAG WIRE HARNESS AND CONNECTOR IN FLOOR
AND INSTRUMENT WIRE HARNESS
Air bag wire harness is included in floor harness (1) and instru-
ment harness (3). The part of coupler side wire harness can be
identified easily as it is covered with a yellow protection tube. Be
very careful when handling it.
1
DISPOSAL
Do not dispose of the live (undeployed) air bag (inflator) modules
and the live (inactivated) seat belt pretensioners. When disposal
is necessary, be sure to deploy/activate the air bag and seat belt
pretensioner according to deployment/activation procedure
described in "Air Bag (Inflator) Module and Seat Belt Pretensioner
Disposal".
• When an open in air bag wire harness (in floor harness (1))
and (in instrument harness (3)), damaged wire harness, con-
nector or terminal is found, replace wire harness, connectors
and terminals as an assembly.
• When installing it, be careful so that the air bag wire harness
(in floor harness (1) and in instrument harness (3)) is not
caught or does not interfere with other parts.
• Make sure air bag system grounding point (2) are clean and
grounds are securely fastened for optimum metal-to-metal
contact. Poor grounding can cause intermittent problems
that are difficult to diagnose.
WARNING:
Failure to follow proper air bag (inflator) module and seat
belt pretensioner disposal procedures can result in air
bag deployment and pretensioner activation which could
cause personal injury. Undeployed air bag (inflator) mod-
ule and inactivated seat belt pretensioner must not be
disposed of through normal refuse channels.
The undeployed air bag (inflator) module and inactivated
seat belt pretensioner contain substances that can cause
severe illness or personal injury if the sealed container is
damaged during disposal.
Advertisement
Table of Contents
