Suzuki Ignis Service Manual page 3979

10B-78 AIR BAG SYSTEM
Side Air Bag (Inflator) Module (If Equipped) Inspection
WARNING:
Be sure to read "Service Precautions" before starting to work and observe every precaution during
work. Neglecting them may result in personal injury or undeployment of the air bag when necessary.
WARNING:
Never measure resistance of side air bag (inflator) mod-
ule or disassemble it. Otherwise personal injury may
result.
Check air bag (inflator) module appearance visually for following
symptoms and if any one of them is applicable, replace with a
new one.
• Air bag has deployed.
• There is a rent or damage in front seat back.
• Wire harness or connector is damaged or clamp for tight-
ness.
Driver Air Bag (Inflator) Module Removal and
Installation
Refer to "Driver Air Bag (Inflator) Module Removal and Installa-
tion" in Section 3C.
Driver Air Bag (Inflator) Module Inspection
Refer to "Driver Air Bag (Inflator) Module Inspection" in Section
3C.
Contact Coil Assembly
Refer to "Contact Coil Cable Assembly Removal and Installation"
in Section 3C.
Contact Coil Assembly Inspection
Refer to "Contact Coil Cable Assembly Inspection" in Section 3C.