Table of Contents
Advertisement
10B-46 AIR BAG SYSTEM
DIAGNOSTIC FLOW TABLE
Step
1
1) This DTC is set when there is a trouble in
"AIR BAG" warning lamp circuit. Failure to
properly perform "Air Bag Diagnostic Sys-
tem Check" may also result in misdiagnosis.
Therefore, check "AIR BAG" warning lamp
circuit again according to "Air Bag Diagnos-
tic System Check".
Is "AIR BAG" warning lamp circuit in good con-
dition?
2
1) Clear DTC (Refer to "Diagnostic Trouble
Code (DTC) Clearance").
2) Check DTC (Refer to "Diagnostic Trouble
Code (DTC) Check").
Is DTC B1061 set?
NOTE:
Upon completion of inspection and repair work, perform following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear diagnostic trouble codes (Refer to "Diagnostic Trouble Code (DTC) Clearance"), if any.
• Repeat "Air Bag Diagnostic System Check" to confirm that the trouble has been corrected.
Action
Yes
Go to step 2.
Substitute a known-good
SDM and recheck.
No
Repair "AIR BAG" warn-
ing lamp circuit.
Recheck air bag system.
Refer to "Air Bag Diag-
nostic System Check".
Advertisement
Table of Contents
