Table of Contents
Advertisement
7A1-18 MANUAL TRANSAXLE
Installation
1) Apply grease to select lever shaft bush and select lever
boss, and install gear shift and select shaft assembly with
new gasket into transaxle.
"A" : Grease 99000-25010
2) Apply sealant to gear shift guide case No. 2 bolt (5). Tighten
gear shift guide case No. 1 bolts (1) and No. 2 bolt (5) to
specified torque at the position that clearance "a" is within 1 -
1.5 mm (0.04 - 0.06 in.).
Tightening torque
Gear shift guide case bolts
(a) : 23 N·m (2.3 kg-m, 17.0 lb-ft)
3) Install washer and gear shift interlock bolt (2) to which seal-
ant have been applied and them tighten it to specified
torque.
"B" : Sealant 99000-31110
Tightening torque
Gear shift interlock bolt (a) : 23 N·m (2.3 kg-m, 17.0 lb-ft)
4) Install washer and 5th to reverse interlock guide bolt (3) to
which sealant have been applied and then tighten it to speci-
fied torque.
"B" : Sealant 99000-31110
Tightening torque
5th to reverse interlock guide bolt (a) : 23 N·m (2.3 kg-m,
17.0 lb-ft)
Advertisement
Table of Contents
