Table of Contents
Advertisement
[A]
[C]
[D]
[C]
[B]
[D]
[C]
Door Lock Actuator Inspection
1) Disconnect negative (–) cable at battery.
2) Remove front door lock assembly referring to "Front Door
3) Remove rear door lock assembly referring to "Rear Door
4) Remove rear end door lock assembly referring to "Rearend
5) Connect 12 V battery positive and negative terminals to the
Front and rear door lock actuator specification
a b c d e f
Right side switch terminals
Left side switch terminals
Unlock
Lock
Lock
Dead lock
Rear end door lock actuator specification
[D]
Unlock
Lock
[A]: Front and rear door lock actuator
[B]: Rear end door lock actuator
[C]: Unlock
[D]: Lock
a
b
Door Switch Inspection
Remove door switch from body and check switch for continuity.
If found to be detective, replace switch.
Door switch specification
OFF [A] position (Door closed)
ON [B] position (Door open)
WINDOWS, MIRRORS, SECURITY AND LOCKS 8D-29
Lock Assembly Inspection" in Section 9.
Lock Assembly Inspection" in Section 9.
Door Removal and Installation" in Section 9.
door lock actuator terminals shown below.
If it does not operate as specified in the table below, replace
door lock assembly.
Lock
Dead lock
Unlock
Unlock
Lock
Unlock
f
e
a
b
a
b
No continuity
Continuity
d
c
Advertisement
Table of Contents
