Table of Contents
Advertisement
10B-62 AIR BAG SYSTEM
1
2
3
a)
4
5
b)
5
5
7
6
Disabling air bag system
1) Turn steering wheel so that vehicle's wheels (front tires) and
pointing straight ahead.
2) Turn ignition switch to "LOCK" position and remove key.
3) Remove "AIR BAG" fuse (2) from fuse box (1).
4) Disconnect Yellow connector (3) of contact coil and combi-
nation switch assembly as follows.
a) Release locking of lock slider (5).
b) After unlocked, disconnect connector.
5) In case of passenger air bag (inflator) module, pull out glove
box while pushing its stopper from both right and left sides
and disconnect Yellow connector (4) of passenger air bag
(inflator) module.
a) Release locking of lock slider (5).
b) After unlocked, disconnect connector.
6) If equipped with side air bag (inflator) module, disconnect
Yellow connector (6) of side air bag (inflator) module under
front seat cushion (7).
a) Release locking of lock slider (5).
b) After unlocked, push down lock slider (5) and disconnect
connector.
NOTE:
With "AIR BAG" fuse removed and ignition switch ON,
"AIR BAG" warning lamp will be ON.
This is normal operation and does not indicate a air bag
system malfunction.
Advertisement
Table of Contents
