Table of Contents
Advertisement
Assembly
1) Install seat countershaft left bearing cup (1) to bearing cone,
tap cup using special tool and plastic hammer (2).
Special tool
(A) : 09913-84510
2) With putting a shim (2) on bearing cup (3), place straight
edge (1) over it and compress it by hand through straight
edge, and then measure clearance "a" between case sur-
face (4) and straight edge using feeler gauge (5).
Clearance between case surface and straight edge
"a" : 0.13 – 0.17 mm (0.0051 – 0.0067 in.)
(Shim protrusion)
3) By repeating above step, select a suitable shim which
adjusts clearance "a" to specification and put it on bearing
cup.
NOTE:
Insert 0.15 mm (0.0059 in.) feeler to know whether or not
a shim fulfills specification quickly.
Available shim thickness
0.40, 0.45, 0.50, 0.55, 0.6, 0.65,0.7, 0.75, 0.8, 0.85, 0.9, 0.95,
1.0,1.05, 1.1 and 1.15 mm (0.015, 0.017, 0.019, 0.021,
0.023,0.025, 0.027, 0.029, 0.031, 0.033,0.035, 0.037, 0.039,
0.041, 0.043 and 0.045 in.)
MANUAL TRANSAXLE 7A1-21
Advertisement
Table of Contents
