Table of Contents
Advertisement
(A)
2) Remove flange nut while holding flange (1) with special tool.
Special tool
(A) : 09930-40113
1
3) Remove flange (1) using special tool.
Special tool
(A) : 09913-65135
4) Drive out bevel pinion shaft from transfer output retainer tap-
ping with plastic hammer.
5) Drive out pinion spacer from bevel pinion shaft.
6) Drive out pinion shaft bearing (2) from bevel pinion shaft (1)
using press.
3. Bearing puller
7) Remove pinion shaft oil seal (1) using special tool.
Special tool
(A) : 09913-50121
8) Drive out pinion shaft bearing outer races (2) (front and rear)
using brass bar (1).
TRANSFER 7D-17
Advertisement
Table of Contents
