Headlight Assembly Removal and Installation
REMOVAL
1) Disconnect negative (–) cable at battery.
2) Remove front bumper referring to "Front Bumper and Rear
Bumper Removal and Installation" in Section 9.
3) Remove headlight mounting bolts and clip.
4) Detach headlight assembly (1) from vehicle.
5) Disconnect couplers (2) from headlight assembly (1).
INSTALLATION
Reverse removal procedure for installation noting the following.
After installation, be sure to inspect and adjust aiming referring to
"Headlight Aiming Adjustment With Screen" in this section.
LIGHTING SYSTEM 8B-15