Table of Contents
Advertisement
WARNING:
• For handling and storage of a live seat belt preten-
sioner, select a place where the ambient temperature
below 65°C (150°F), without high humidity and away
from electric noise.
• Never carry the seat belt pretensioner by webbing.
• When placing live seat belt pretensioner on workbench
or other surface, be sure not to put something on seat
belt pretensioner.
Otherwise, personal injury may result.
DEPLOYED AIR BAG (INFLATOR) MODULE AND ACTI-
VATED SEAT BELT PRETENSIONER
WARNING:
• The air bag (inflator) module and seat belt pretensioner
immediately after deployment/activation is very hot.
Wait for at least 30 minutes to cool it off before pro-
ceeding the work.
• Do not apply water, oil, etc. to deployed air bag (infla-
tor) module and to activated seat belt pretensioner.
• After an air bag (inflator) module has been deployed,
the surface of the air bag may contain a powdery resi-
due. This powder consists primarily of cornstarch
(used to lubricate the bag as it inflates) and by-prod-
ucts of the chemical reaction. As with many service
procedures, gloves and safety glasses should be
worn.
• Wash your hands with mild soap and water after com-
pleting the work.
Refer to the procedure described under "Deployed Air Bag (Infla-
tor) Module and Activated Seat Belt Pretensioner Disposal".
AIR BAG SYSTEM 10B-67
Advertisement
Table of Contents
