Table of Contents
Advertisement
8D-34 WINDOWS, MIRRORS, SECURITY AND LOCKS
[A]
12V
0V
[A]: Figure "A"
[B]: Figure "B"
[C]: Figure "C"
[D]: Figure "D"
2
1
[B]
12V
0V
1s/div
4
3
[C]
12V
0V
1s/div
Replacement of Transmitter Battery
If transmitter becomes unreliable, replace transmitter battery as
follows.
1) Remove screw (1) and transmitter cover (2).
2) Remove transmitter (3) from transmitter holder (4).
CAUTION:
Use care not to allow grease or dirt to be attached on the
printed circuit board and the battery.
3) Unhook tabs and remove transmitter.
4) Replace the battery (lithium disc-type CR1616 or equivalent
battery) so its + terminal faces "+" mark on transmitter.
5) Fit together transmitter (3) and install it into transmitter
holder (4).
6) Install transmitter cover (2) and screw (1).
7) Make sure the door locks can be operated with transmitter.
NOTE:
• To prevent theft, be sure to break the transmitter
before discarding it.
• Dispose of the used battery properly according to
applicable rules or regulations. Do not dispose of lith-
ium batteries with ordinary household trash.
[D]
12V
0V
1s/div
2ms/div
Advertisement
Table of Contents
