Table of Contents
Advertisement
6C-4 ENGINE FUEL
1
Fuel Lines Inspection
CAUTION:
Due to the fact that fuel feed line (1) is under high pres-
sure, use special care when servicing it.
Visually inspect fuel lines for evidence of fuel leakage, hose crack
and deterioration, or damage.
Make sure all clamps are secure.
Replace parts as needed.
Fuel Pipe Removal and Installation
WARNING:
A small amount of fuel may be released after disconnect-
ing fuel hose. In order to reduce the chance of personal
injury, cover hose and pipe to be disconnected with a
shop cloth.
Be sure to put that cloth in an approved container when
disconnection is completed.
Removal
1) Relieve fuel pressure in fuel feed line according to "Fuel
pressure relief procedure" in Section 6.
2) Disconnect negative cable at battery.
3) Disconnect fuel pipe joint and fuel hose from fuel pipe at the
front and rear of each fuel pipe.
For quick joint (2), disconnect it as follows :
a) Remove mud, dust and/or foreign material between pipe (1)
and joint by blowing compressed air.
b) Unlock joint lock by inserting special tool between pipe and
joint.
Special tool
(A) : 09919-47020
c) Disconnect joint (2) from pipe (1).
Advertisement
Table of Contents
