8D-12 WINDOWS, MIRRORS, SECURITY AND LOCKS
1
Wiper and Washer Switch Removal and
Installation
REMOVAL
1) Disconnect negative (–) cable at battery.
2) Remove dash side trim (1), steering column hole cover (2)
3) Remove wiper and washer switch (4) while releasing the
4
4) Disconnect wiper and washer switch connector.
3
2
INSTALLATION
Reverse removal procedure for installation noting the followings.
and steering column covers (3).
locks.
• Connect wiper and washer switch connector securely.
• Push wiper and washer switch into steering lock assembly till
it clicks.