Table of Contents
Advertisement
3) Remove input shaft oil seal (1) using special tools, if neces-
sary.
Special tool
(A) : 09930-30104
(B) : 09923-74510
4) If input shaft right bearing has been left in right case, pull it
out using special tools.
Special tool
(A) : 09930-30104
(B) : 09923-74510
5) Also pull out countershaft right bearing cup (2) using special
tools, if necessary.
Special tool
09941-64511
09930-30104
6) Remove counter shaft left bearing cup from left case using
special tools.
Special tool
09913-84510
7) Replace differential side oil seal(s) referring to "Differential
Side Oil Seal Replacement" in this section, if necessary.
8) Remove oil gutter from left case, if necessary.
Assembly
NOTE:
Before installation, wash each part and apply specified
transaxle oil to sliding faces of bearing and gear.
1) If input shaft oil seal (1) has been removed, install it with its
spring side facing upward.
Use special tool and hammer for installation and apply
grease to oil seal lip.
"B" : Grease 99000-25010
Special tool
(A) : 09951-76010
2) If counter shaft right bearing cup (2) has been removed,
install it using special tools and hammer.
Special tool
(B) : 09924-74510
(C) : 09925-68210
MANUAL TRANSAXLE 7A1-29
Advertisement
Table of Contents
