Suzuki Ignis Service Manual page 3700

Rear Differential Components
1. Drive bevel pinion nut
: After tightening nut so as rotational
torque of drive bevel pinion to be in speci-
fied torque, caulk nut securely.
2. Companion flange
3. Oil seal
: Apply grease 99000-25010 to oil seal lip.
4. Drive bevel pinion front taper roller bearing
5. Differential carrier bolt
: Apply sealant 99000-31110 to thread
part.
6. Differential carrier
7. Differential side bearing cap
8. Differential side bearing cap bolt
9. Spacer
Unit Repair Overhaul
10. Drive bevel pinion rear taper roller bear-
ing
11. Bevel pinion shim
12. Drive bevel pinion (hypoid gear)
13. Drive bevel gear (hypoid gear)
14. Differential side bearing
15. Shim
16. Drive bevel gear bolt
: Apply thread lock cement 99000-
32110 to thread.
17. Differential case
18. Differential pinion washer
REAR DIFFERENTIAL 7F-5
19. Differential pinion
20. Differential side washer
21. Differential side gear
22. Differential pinion shaft
23. Differential side spring washer
Do not reuse.
Tightening torque
Apply differential oil.