Table of Contents
Advertisement
6A1-26 ENGINE MECHANICAL (M13 ENGINE)
Oil Pan and Oil Pump Strainer Components
[A] : Sealant application amount
"a" : 3 mm (0.12 in.)
"b" : 2 mm (0.08 in.)
1. Oil pan
: Apply sealant 99000-31250 to mating surface.
2. Strainer
2
1
3. O-ring
4. Gasket
5. Drain plug
6. Strainer bolt
7. Bracket bolt
Oil Pan and Oil Pump Strainer Removal and
Installation
Removal
1) Remove oil level gauge.
2) Drain engine oil by removing drain plug.
3) Remove exhaust No.1 pipe (1), exhaust manifold stiffener
(2) and transaxle stiffener (3).
4) For 2WD vehicle, remove engine rear mounting bracket.
5) For 4WD vehicle, remove transfer referring to "Transfer Dis-
2
mounting and Mounting" in Section 7D.
3
8. Oil pan nut
9. Oil pan bolt
Tightening torque
Do not reuse.
Advertisement
Table of Contents
