Table of Contents
Advertisement
6A1-40 ENGINE MECHANICAL (M13 ENGINE)
[A] : Sealant application amount
"a" : 3 mm (0.12 in.)
"b" : 2 mm (0.08 in.)
1. Rotor plate
2. O ring
3. Outer rotor
4. Inner rotor
5. Timing chain cover
: Apply sealant 99000-31140 to the
mating surface of cylinder and cylinder
head.
: Apply sealant 99000-31250 to mating
surface of timing chain cover referring
to the figure of Step 4) of "Installation"
under "Timing Chain Cover Removal
and Installation" in this section.
6. Rotor plate bolt
7. Relief valve
8. Spring
9. Retainer
Oil Pump Removal and Installation
Removal
Remove timing chain cover referring to "Timing Chain Cover
Removal and Installation" in this section.
Installation
For installation referring to "Timing Chain Cover Removal and
Installation" in this section.
Oil Pump Disassembly and Assembly
Disassembly
1) Remove rotor plate (1) by removing its mounting bolts.
2) Remove outer rotor (1) and inner rotor (2).
10. Circlip
Tightening torque
Do not reuse.
Apply thin coat of engine oil to sliding
surface of each parts.
Advertisement
Table of Contents
