Table of Contents
Advertisement
9-42 BODY SERVICE
2
2
2
1, (a)
2
2
2
1
INSTALLATION
Reverse removal procedure to install instrument panel noting the
following instructions.
1, (a)
12) Remove instrument panel mounting bolts (2).
13) Remove instrument panel (1) with steering support member
and instrument panel harness.
• When installing each part, be careful not to catch any cable
or wiring harness.
• Tighten instrument panel mounting bolts (1) to specified
torque.
Tightening torque
Instrument panel mounting bolts
(a): 23 N·m (2.3 kg-m)
• When installing steering column assembly. Refer to "Steer-
ing Column Removal and Installation" in Section 3C.
• Adjust heater control cables. Refer to "Heater Unit Removal
and Installation" in Section 1A.
• Enable air bag system if equipped. Refer to "Enabling air
bag system" in Section 10B.
Advertisement
Table of Contents
