Table of Contents
Advertisement
9-20 BODY SERVICE
Quarter Window Removal and Installation
REMOVAL AND INSTALLATION
Refer to "Windshield Removal and Installation" in this section as
removal and installation procedures are basically the same. How-
ever, note the following.
• Observe the following precautions when applying adhesive
(1) along glass (2) edge.
• Adhesive (1) should be applied evenly especially in height.
• Be careful not to damage primer (3).
• Press glass against body quickly after adhesive (1) is
applied.
Adhesive amount specification and position for quarter
window
Height "a": 13 mm (0.51 in.)
Width "b": 6 mm (0.24 in.)
Width "c": 14 mm (0.55 in.)
Position "d": 12 mm (0.47 in.) for glass front and bottom
sections.
Position "d": 11 mm (0.43 in.) for glass upper section
Position "d": 45 mm (1.77 in.) for glass rear section
Advertisement
Table of Contents
