7D-12 TRANSFER
Transfer Inspection
• Check each bearing for smooth rotation, wear or discolora-
tion.
If found abnormal, replace.
• Check oil seal for leakage and its lip for excessive hardness.
If either is found, replace.
• Check transfer case for cracks.
• Check bevel pinion and bevel gear for wear or cracks.
• Check pinion gear and pinon shaft for wear or damage.
Reduction Driven Gear Disassembly and
Assembly
Disassembly
1) Drive out left side driven gear bearing using special tool.
Special tool
(A) : 09913-65135
2) Drive out right side driven gear bearing using bearing puller
(1), press (2) and special tool.
Special tool
(A) : 09925-58210
3) Uncaulk bevel gear nut, and remove bevel gear nut while
holding bevel gear with special tool and vise (1).
Special tool
(A): 09941-58020
(B): 09924-57610