Table of Contents
Advertisement
6) Install tap (M16 X 1.5) (1) to clutch release shaft No.1 bush.
7) Pull out No.1 bush using tap (1) and special tools.
Special tool
(B) : 09923-46020
(C) : 09930-30104
Installation
1) Drive in a new No.1 bush using special tools, and then apply
grease to bush inside.
Special tool
(A) : 09930-30104
(B) : 09923-46030
"A" : Grease 99000-25010
2) Install release shaft with return spring.
Clutch Release Mechanism Inspection
Clutch release bearing
Check clutch release bearing for smooth rotation.
If abnormality is found, replace it.
CAUTION:
Do not wash release bearing. Washing may cause grease
leakage and consequential bearing damage.
CLUTCH 7C1-13
Advertisement
Table of Contents
