6C-6 ENGINE FUEL
Fuel Tank Inlet Valve Removal and Installa-
tion
WARNING:
Before starting the following procedure, be sure to
observe "Precautions" in this section.
Removal
1) Remove fuel filler cap.
2) Insert hose of a hand operated pump into fuel filler hose (1)
and drain fuel in space "A" in the figure.
CAUTION:
Do not force pump hose into fuel tank, or pump hose
may damage fuel tank inlet valve (2).
3) Hoist vehicle, and remove clamp (2) and fuel filler hose (1)
from fuel tank.
4) Remove fuel tank inlet valve (1) using flat head rod (2) or the
like.
CAUTION:
Be careful not to damage fuel tank inlet valve (1) with flat
head rod (2) or the like.