Table of Contents
Advertisement
1
2
Rear Door Window Regulator Removal and
Installation
REMOVAL
1) Remove door glass (1) referring to "Rear Door Window
Removal and Installation" in this section.
2) Loosen regulator mounting screws (2) and take out regulator
through hole (3) as shown.
3
INSTALLATION
Reverse removal procedure to install window regulator noting the
following instruction.
• Apply grease to sliding and rotating portions or regulator.
Grease 99000-25010
Rear Door Window Regulator Inspection
Check rollers (1) for wear and damage. If found defective, replace
it with a new one.
BODY SERVICE 9-13
Advertisement
Table of Contents
