6G-12 CRANKING SYSTEM
FIELD COIL (0.8 kW TYPE)
Ground Test
Check continuity between brush and bare surface.
If there is continuity, field windings are grounded.
The yoke assembly must be replaced.
GEARS (1.2 kW TYPE)
Inspect internal gear and planetary gears for wear, damage or
other abnormal conditions. Replace if necessary.
PINION AND OVER-RUNNING CLUTCH
• Inspect pinion for wear, damage or other abnormal condi-
tions.
Check that clutch locks up when turned in direction of drive
and rotates smoothly in reverse direction. Replace if neces-
sary.
• Inspect spline teeth for wear or damage. Replace if neces-
sary.
Inspect pinion for smooth movement.
[A]: 1.2 kW
[B]: 0.8 kW