Suzuki Ignis Service Manual page 3673

7D-6 TRANSFER
2, (b)
1, (a)
Mounting
Reverse dismounting procedure for installation noting the follow-
ing.
• Tighten transfer mounting bolts (3) to specified torque.
Tightening torque
Transfer mounting bolts (a) : 50 N·m (5.0 kg-m, 36.5 lb-ft)
1. Transaxle
2. Transfer assembly
• Tighten transfer rear mounting bracket No.2 bolts (1) and
transfer rear mounting bracket nuts (2) to specified torque.
Tightening torque
Transfer rear mounting bracket No.2 bolts
(a) : 55 N·m (5.5 kg-m, 40.0 lb-ft)
Transfer rear mounting bracket nuts
(b) : 55 N·m (5.5 kg-m, 40.0 lb-ft)
1, (a)
• Tighten transfer rear mounting bracket bolts (1) to specified
torque.
Tightening torque
Transfer rear mounting bracket bolts
(a) : 55 N·m (5.5 kg-m, 40.0 lb-ft)
• Tighten transfer to engine stiffener bolts to specified torque,
if equipped.
Tightening torque
Transfer to engine stiffener No.1 bolts
(a) : 50 N·m (5.0 kg-m, 36.5 lb-ft)
Transfer to engine stiffener No.2 bolts
(b) : 23 N·m (2.3 kg-m, 17.0 lb-ft)