Table of Contents
Advertisement
1
2
"a"
3
"12" "13" "20" "21" "16" "17" "8" "9"
"2"
"5"
"3"
"4"
"1"
"10" "11" "18" "19" "14" "15" "6" "7"
1
3) With hexagonal section (1) of intake camshaft (2) held sta-
tionary with spanner or the like, loosen mounting bolt of
intake cam timing sprocket assembly (3) and remove it.
CAUTION:
Never attempt to loosen mounting bolt with intake cam
timing sprocket assembly held stationary. Failure to fol-
low this could result in damage to lock pin.
Do not loosen bolt "a" because intake cam timing
sprocket assembly is not serviceable.
4) Loosen camshaft housing bolts in such order as indicated in
figure and remove them.
5) Remove camshaft housings.
6) Remove intake and exhaust camshafts.
7) Remove camshaft bearing (1).
8) Remove tappets (2) with shims (1).
ENGINE MECHANICAL (M13 ENGINE) 6A1-51
Advertisement
Table of Contents
