Table of Contents
Advertisement
10B-90 AIR BAG SYSTEM
3
10 m (33 ft)
2
10) Stretch deployment harness (1) to its full length 10 m (33 ft).
11) Place 12 volts vehicle battery (2) near shorted end of deploy-
12) Completely cover windshield area and front door window
1
13) Notify all people in immediate area that you intend to deploy
8) Route deployment harness (1) out of vehicle.
9) Verify that inside of vehicle and area surrounding vehicle are
clear of all people and loose or flammable objects.
ment harness (1).
openings with drop cloth, a blanket or any similar item (3).
This reduces possibility of injury due to possible fragmenta-
tion of vehicle's glass or interior.
air bag (inflator) module or activate seat belt pretensioner.
NOTE:
• When air bag (inflator) module deploys or seat belt pre-
tensioner activates, rapid gas expansion will create
substantial report. Wear suitable ear protection. Notify
all people in immediate area that you intend to deploy
air bag (inflator) module or to activate seat belt preten-
sioner and suitable ear protection should be worn.
• After air bag (inflator) module has been deployed, sur-
face of air bag may contain powdery residue. This
powder consists primarily of cornstarch (used to lubri-
cate air bag (inflator) module as it inflates) and by-
products of chemical reaction.
WARNING:
• Do not place deployed air bag (inflator) module and
activated seat belt pretensioner near any flammable
objects.
• Do not apply water, oil, etc. to deployed air bag (infla-
tor) module and activated seat belt pretensioner.
• Wait for about 30 minutes before touching any metal
surface of air bag (inflater) module or seat belt preten-
sioner module. Disregarding these precautions may
cause fire or personal injury.
Failure to follow procedures may result in fire or per-
sonal injury.
Advertisement
Table of Contents
