Table of Contents
Advertisement
WINDOWS, MIRRORS, SECURITY AND LOCKS 8D-31
Change of Signal Mode
NOTE:
When the keyless entry signal mode is changed from the
hazard warning signal mode to interior light signal mode,
interior light will flash once.
When the signal mode is changed from interior light sig-
nal mode to hazard warning signal mode, hazard warning
light will flash once.
1) Make sure that all doors are closed and ignition key is out of
ignition switch.
2) Perform the following procedures within 10 seconds.
a) Insert ignition key to ignition switch.
b) Turn ignition switch to "ACC" position, turn ignition switch to
"OFF" position, and then pull off ignition key from ignition
switch.
c) Repeat step b).
d) Turn ignition switch to "ACC" position, turn ignition switch to
"OFF" position, and then push "UNLOCK" button on trans-
mitter more than three times.
3) Confirm that either hazard warning light or interior light flash
once. With this, change of signal mode is completed.
Advertisement
Table of Contents
