Table of Contents
Advertisement
6A1-34 ENGINE MECHANICAL (M13 ENGINE)
Timing Chain Cover Components
[A]: Sealant application amount
"a": 3 mm (0.12 in.)
"b": 2 mm (0.08 in.)
1. Crankshaft pulley bolt
2. Crankshaft pulley
3. Oil seal
: Apply engine oil to oil seal lip.
4. Timing chain cover
: Apply sealant 99000-31140 to the
mating surface of cylinder and cylin-
der head.
: Apply sealant 99000-31250 to the
mating surface of timing chain cover
referring to the figure of Step 1) of
"Installation" under "Timing Chain
Cover Removal and Installation" in
this section.
5. Pin
6. Cylinder head cover gasket
7. Timing chain cover mounting bolts
8. Oil pan mounting bolt
9. Oil pan mounting nut
10. Cylinder head cover
: Apply sealant 99000-31250 to the
sealing point for timing chain cover
mating surface and cylinder head
gasket sealing point referring to
"Installation" under "Cylinder Head
Cover Removal and Installation" in
this section.
11. Oil gallery pipe No.1
12. Copper washer
13. Oil gallery pipe No.1 bolt
14. Oil gallery pipe No.2
15. Oil gallery pipe No.2 bolt
16. Oil gallery pipe No.3
17. Oil gallery pipe No.3 bolt
18. O ring
19. Oil control valve
20.
Oil control valve mounting nut
21.
O ring
22. Cap
23.
O ring
24. Cap bolt
25. Timing chain cover mounting nut
Tightening torque
Do not reuse.
Advertisement
Table of Contents
