Dell Z9500 Reference Manual page 1085

Parameters
vrf vrf-name
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
8.3.1.0
Example
Dell#show isis graceful-restart detail
Configured Timer Value
======================
Graceful Restart
T3 Timer
T3 Timeout Value
T2 Timeout Value
T1 Timeout Value
Adjacency wait time : 30
Operational Timer Value
======================
Current Mode/State
T3 Time left
T2 Time left
Restart ACK rcv count
Restart Req rcv count
Suppress Adj rcv count : 0 (level-1), 0 (level-2)
Restart CSNP rcv count : 0 (level-1), 0 (level-2)
Database Sync count
Intermediate System to Intermediate System (IS-IS)
(Optional) Enter the keyword vrf followed by the name if the
VRf to display IS-IS graceful restart details corresponding to
that VRF.
NOTE: If you do not specify this option, the IS-IS
graceful restart details corresponding to the default VRF
are displayed.
Description
Added support for VRF. Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
: Enabled
: Manual
: 30
: 30 (level-1), 30 (level-2)
: 5, retry count: 1
: Normal/RUNNING
: 0
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
1085