Version
9.2.(0.0)
8.3.19.0
8.3.7.0
7.8.1.0
Related
show ip pim tib
Commands
ip mroute
Assign a static mroute.
Z9500
Syntax
ip mroute [vrf vrf-name] destination mask {ip-address | null 0|
{{bgp| ospf} process-id | isis | rip | static} {ip-address |
tag | null 0}} [distance]
To delete a specific static mroute, use the no ip mroute destination mask
{ip-address | null 0| {{bgp| ospf} process-id | isis | rip |
static} {ip-address | tag | null 0}} [distance] command.
To delete all mroutes matching a certain mroute, use the no ip mroute
destination mask command.
Parameters
vrf vrf-name
destination
mask
null 0
[protocol
[process-id |
tag] ip-address]
Multicast
Description
Added support for keyword snooping on the Z9000,
S4810, and S4820T.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the C-Series.
— shows the PIM tree information base.
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to assign a static mroute to that VRF.
NOTE: Applies to specific VRF if input is provided, else
applies to Default VRF.
Enter the IP address in dotted decimal format of the
destination device.
Enter the mask in slash prefix formation ( /x ) or in dotted
decimal format.
(OPTIONAL) Enter the keyword null then zero (0).
(OPTIONAL) Enter one of the routing protocols:
•
Enter the BGP as-number then the IP address in dotted
decimal format of the reverse path forwarding (RPF)
neighbor. The range is from 1 to 65535.
•
Enter the OSPF process identification number then the IP
address in dotted decimal format of the RPF neighbor.
the range is from 1 to 65535.
•
Enter the IS-IS alphanumeric tag string then the IP
address in dotted decimal format of the RPF neighbor.
1171