Show Running-Config Bgp - Dell Z9500 Reference Manual

Field
State/Pfxrcd
Example
Dell#show ip bgp summary
BGP router identifier 192.168.11.5, local AS number 100
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
2 network entrie(s) using 152 bytes of memory
2 paths using 208 bytes of memory
BGP-RIB over all using 210 bytes of memory
2 BGP path attribute entrie(s) using 144 bytes of memory
1 BGP AS-PATH entrie(s) using 10 bytes of memory
2 neighbor(s) using 16384 bytes of memory
Neighbor
InQ
172.16.0.2
0
192.168.10.2
0
Dell#

show running-config bgp

To display the current BGP configuration, use this feature.
Z9500
Syntax
show running-config bgp
Defaults none
Border Gateway Protocol
Description
Time Established
< 1 day
< 1 week
> 1 week
If the neighbor is in Established stage, the number of
network prefixes received.
If a maximum limit was configured with the neighbor
maximum-prefix command, (prfxd) appears in this
column.
If the neighbor is not in Established stage, the current stage
is displayed (Idle, Connect, Active, OpenSent,
OpenConfirm). When the peer is transitioning between
states and clearing the routes received, the phrase (Purging)
may appear in this column.
If the neighbor is disabled, the phrase (Admin shut) appears
in this column.
AS
OutQ Up/Down State/Pfx
200
0 00:05:34 2
100
0 00:00:00 (shut)
Display Example
00:12:23 (hours:minutes:seconds)
1d21h (DaysHours)
11w2d (WeeksDays)
MsgRcvd MsgSent
10 8
0 22
TblVer
0
0
459