Dell Z9500 Reference Manual page 1289

Error Type
Intf_Down
Non-Dr
Self-Org
Wrong_Len
Invld-Nbr
Nbr-State
Auth-Error
MD5-Error
Cksum-Err
Version
AreaMismatch
Conf-Issue
No-Buffer
Seq-no
Socket
Q-overflow
Unknown-Pkt
Example
Dell#show ip ospf 1 statistics global
OSPF Packet Count
RX 10
TX 10
OSPF Global Queue Length
Hello-Q
LSR-Q
Other-Q
Error packets (Only for RX)
Intf-Down
Wrong-Len
Auth-Err
Version
No-Buffer
Open Shortest Path First (OSPFv2 and OSPFv3)
Description
Received packets on an interface that is either down or
OSPF is not enabled.
Received packets with a destination address of ALL_DRS
even though SELF is not a designated router.
Receive the self originated packet.
The received packet length is different to what was
indicated in the OSPF header.
LSA, LSR, LSU, and DDB are received from a peer which is
not a neighbor peer.
LSA, LSR, and LSU are received from a neighbor with stats
less than the loading state.
Simple authentication error.
MD5 error
Checksum Error
Version mismatch
Area mismatch
The received hello packet has a different hello or dead
interval than the configuration.
Buffer allocation failure.
A sequence no errors occurred during the database
exchange process.
Socket Read/Write operation error.
Packets dropped due to queue overflow.
Received packet is not an OSPF packet.
Total Error Hello DDiscr LSReq LSUpd LSAck
0 8
0 10
TxQ-Len RxQ-Len Tx-Mark Rx-Mark
0 0
0 0
0 0
0 Non-Dr
0 Invld-Nbr
0 MD5-Err
0 AreaMis
0 Seq-No
2 0 0
0 0 0
0 2
0 0
0 0
0 Self-Org 0
0 Nbr-State 0
0 Chksum 0
0 Conf-Issues 0
0 Socket 0
0
0
1289