Policy-Based Routing (Pbr); Description - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

Policy-based Routing (PBR)

Policy-based routing (PBR) allows you to apply routing policies to specific interfaces. To enable PBR,

create a redirect list and apply it to the interface. After the redirect list is applied to the interface, all traffic

passing through the interface is subject to the rules defined in the redirect list. PBR is supported by the

Dell Networking Operating System (OS).

You can apply PBR to physical interfaces and logical interfaces (such as a link aggregation group [LAG] or

virtual local area network [VLAN]). Trace lists and redirect lists do not function correctly when you

configure both in the same configuration.

NOTE: Apply PBR to Layer 3 interfaces only.

NOTE: For more information, refer to

Add a description to this redirect list.

description {description}

To remove the description, use the no description {description}

REDIRECT-LIST

Policy-based Routing (PBR)

Content Addressable Memory (CAM)

Enter a description to identify the IP redirect list (16

characters maximum).

Introduced on the Z9500.

Introduced on the S4810, S4820T, S6000, and Z9000.

Introduced on the C-Series and S-Series.

Introduced on the E-Series TeraScale.