Show Hardware - Dell Z9500 Reference Manual

Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.11.1
8.1.1.0
Example
Dell# show control-traffic counters

show hardware

Display input and output traffic statistics and other operational information about a specified hardware
component.
Z9500
Syntax
show hardware {cp {cpu {data-plane | i2c | management| sata-
interface} statistics} |
cp-switch {counters | details | drops | port-stats |register |
table-dump} |
linecard slot-id {buffer {total-buffer | unit unit-num [port
port-num [queue queue-num]]} |
cpu {data-plane | i2c | management | sata-interface} statistics
|
drops {unit unit-num {port {port-num | port-range}} |
user-port {user-port-num | port-range}} |
unit unit-num {counters | details | ipmc-replication | port-
stats | register | table-dump} |
bp-link-map | bp-link-state | higig unit unit-num [port port-
num]}
party-bus {port port-num statistics | all}
rp {cpu {data-plane | i2c | management | sata-interface}
statistics} |
646
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the ES-Series.
Debugging and Diagnostics