Track Ip - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

another VLAN. If the interface belongs to several VLANs, remove it from all VLANs

to change it to an untagged interface.

Tagged interfaces can belong to multiple VLANs, while untagged interfaces can

only belong to one VLAN at a time.

interface vlan

track ip

Track the Layer 3 operational state of a Layer 3 VLAN, using a subset of the VLAN member interfaces.

track ip interface

To remove the tracking feature from the VLAN, use the no track ip interface

Not configured.

INTERFACE VLAN

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

— configures a VLAN.

— specifies which interfaces in a VLAN are untagged.

Enter the following keywords and slot/port or number

information:

For a port channel interface, enter the keywords port-

channel then a number. The range is from 1 to 512.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

Introduced on the S6000-ON.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Added support for 4-port 40G line cards on ExaScale.