Dell Z9500 Reference Manual page 1411

isolated
mapping
primary vlan-id
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.1
7.8.1.0
Usage
Examples of all types of command output are shown below. The first type of
Information
output is the result of not entering an optional keyword. It displays a detailed list of
all PVLANs and their member VLANs and interfaces. The other types of output
show details about PVLAN subsets.
The following describes the show private-vlan command shown in the
Examples below.
Field
Primary
Secondary
Private VLAN (PVLAN)
interface. The range of Z9500 slot IDs is 0 to 2. The valid
values are:
• port-channel port-channel-number
• tengigabitethernet slot/port
• fortygigE slot/port
(OPTIONAL) Enter the keyword isolated and a PVLAN ID
number to display the configuration of an isolated PVLAN.
(OPTIONAL) Enter the keyword mapping to display the
community and isolated PVLAN mapping to primary PVLANs.
(OPTIONAL) Enter the keyword primary and a PVLAN ID
number to display the configuration of a primary PVLAN.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Description
Displays the VLAN ID of the designated or associated
primary VLAN(s).
Displays the VLAN ID of the designated or associated
secondary VLAN(s).
1411