Ipv6 Dhcp Snooping Trust; Ip Dhcp Snooping Verify Mac-Address - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:
Table of Contents

Advertisement

Version
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
7.8.1.0

ipv6 dhcp snooping trust

Configure an interface as trusted for DHCP snooping.
Syntax
[no] ipv6 dhcp snooping trust
To disable dhcp snooping trusted capability on this interface, use the no ipv6
dhcp snooping trust command.
Command
INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.7(0.0)

ip dhcp snooping verify mac-address

Validate a DHCP packet's source hardware address against the client hardware address field (CHADDR) in
the payload.
Z9500
Syntax
[no] ip dhcp snooping verify mac-address
Defaults
Disabled
Command
CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
704
Description
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the C-Series and S-Series.
Description
Introduced on the S4810, S4820T, S6000 and Z-Series.
Description
Introduced on the Z9500.
Dynamic Host Configuration Protocol (DHCP)

Advertisement

Table of Contents
loading

Table of Contents