Show Ipv6 Ospf Database - Dell Z9500 Reference Manual

Example
Dell#show ipv6 ospf 3 interface tengigabitethernet 1/2
TenGigabitEthernet 1/2 is up, line protocol is up
67420217
Retransmit 5
Dell#

show ipv6 ospf database

Display information in the OSPFv3 database, including link-state advertisements (LSAs).
Z9500
Syntax
show ipv6 ospf [process-number] [vrf vrf-name] database
[database-summary | grace-lsa]
Parameters
process-
number
vrf vrf-name
database-
summary
grace-lsa
Defaults none
Command
EXEC
Modes
EXEC Privilege
Command
Version
History
9.7(0.0)
9.1.(0.0)
Open Shortest Path First (OSPFv2 and OSPFv3)
Link Local Address fe80::201:e8ff:fe17:5bbd, Interface ID
Area 0, Process ID 1, Instance ID 0, Router ID 11.1.1.1
NetworkType BROADCAST, Cost: 1, Passive: No
Transmit Delay is 100 sec, State DR, Priority 1
Interface is using OSPF global mode BFD configuration.
Designated router on this network is 11.1.1.1 (local)
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 1,
Enter the OSPF process number.
(Optional) Enter the keyword vrf followed by the name of the
VRF to display neighbors corresponding to that VRF.
(OPTIONAL) Enter the keywords database-summary to
view a summary of database LSA information.
(OPTIONAL): Enter the keywords grace-lsa to display the
Type-11 Grace LSAs sent and received on an OSPFv3 router.
Description
Added support for VRF.
Added support for OSPFv3 on the S4810 and Z9000.
NOTE: If you do not specify this option, neighbors
corresponding to the default VRF are displayed.
1327