Show Ip Ospf Asbr - Dell Z9500 Reference Manual

Dell#
Related
show ip ospf database
Commands
show ip ospf interface
show ip ospf neighbor

show ip ospf asbr

Display all autonomous system boundary router (ASBR) routers visible to OSPF.
Z9500
Syntax
show ip ospf process-id asbr
Parameters
process-id
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.8.1.0
7.6.1.0
7.5.1.0
Usage To isolate problems with external routes, use this command. In OSPF, external
Information routes are calculated by adding the LSA cost to the cost of reaching the ASBR
router. If an external route does not have the correct cost, use this command to
1262
Area ranges are
— displays information about the OSPF routes configured.
— displays the OSPF interfaces configured.
— displays the OSPF neighbors configured.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support of Multi-Process OSPF.
Added the process-id option, in support of Multi-Process
OSPF.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3)