Link Layer Discovery Protocol (Lldp); Llpd Commands; Advertise Dot1-Tlv - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:
Table of Contents

Advertisement

Link Layer Discovery Protocol (LLDP)

Link layer discovery protocol (LLDP) advertises connectivity and management from the local station to
the adjacent stations on an IEEE 802 LAN.
This chapter contains the following sections:

LLPD Commands

LLDP-MED Commands
LLDP facilitates multi-vendor interoperability by using standard management tools to discover and make
available a physical topology for network management. The Dell Networking operating system
implementation of LLDP is based on IEEE standard 801.1ab.
The starting point for using LLDP is invoking LLDP with the protocol lldp command in either
CONFIGURATION or INTERFACE mode.
The information LLDP distributes is stored by its recipients in a standard management information base
(MIB). You can access the information by a network management system through a management
protocol such as simple network management protocol (SNMP).
LLPD Commands
The following are LLDP commands.

advertise dot1-tlv

Advertise dot1 TLVs (Type, Length, Value).
Z9500
Syntax
advertise dot1-tlv {port-protocol-vlan-id | port-vlan-id |
vlan-name}
To remove advertised dot1-tlv, use the no advertise dot1-tlv {port-
protocol-vlan-id | port-vlan-id | vlan-name} command.
Parameters
port-protocol-
vlan-id
port-vlan-id
1140
Enter the keywords port-protocol-vlan-id to advertise
the port protocol VLAN identification TLV.
Enter the keywords port-vlan-id to advertise the port
VLAN identification TLV.
Link Layer Discovery Protocol (LLDP)
30

Advertisement

Table of Contents
loading

Table of Contents