Show Ip Ospf Database Opaque-As - Dell Z9500 Reference Manual

Checksum: 0x19c2
--More--
Related show ip ospf database
Commands

show ip ospf database opaque-as

Display the opaque-as (type 11) LSA information.
Z9500
Syntax
show ip ospf process-id database opaque-as [link-state-id]
[adv-router ip-address]
Parameters
process-id
link-state-id
adv-router ip-
address
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
Open Shortest Path First (OSPFv2 and OSPFv3)
— displays OSPF database information.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
(OPTIONAL) Specify LSA ID in dotted decimal format. The
LSA ID value depends on the LSA type, and it can be one of
the following:
• the network's IP address for Type 3 LSAs or Type 5 LSAs
• the router's OSPF router ID for Type 1 LSAs or Type 4
LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
(OPTIONAL) Enter the keywords adv-router and the ip-
address to display only the LSA information about that
router.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
1275