Show Ip Traffic - Dell Z9500 Reference Manual

Example
Dell>show ip route summary
Route Source
connected
static
ospf 100
Intra-area: 762 Inter-area: 1 External-1: 600 External-2: 5
Total
Total 1388 active route(s) using 222440 bytes
Total 2 non-active route(s) using 128 bytes
Dell>
Related
show ip route
Commands

show ip traffic

View IP traffic statistics on Z9500 CPUs, including ICMP, UDP, TCP and ARP counters.
Z9500
Syntax
show ip traffic {all | cp | rp}
Parameters
all
cp
rp
Default View IP traffic statistics from all processors.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
IPv4 Routing
Active Routes
17
3
1368
1388
— displays information about the routes found in the switch.
(OPTIONAL) Enter the keyword all to view IP traffic
statistics from all processors.
(OPTIONAL) Enter the keyword cp to view only IP traffic
statistics from the Control Processor.
(OPTIONAL) Enter the keyword rp to view only IP traffic
statistics from the Route Processor.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Non-active Routes
0
0
2
2
951