Dell Z9500 Reference Manual page 878

slot slot-id
npuUnit npu-id
hg-port-
channel 0
Command
EXEC, EXEC Privilege
Modes
Command
Version
History
9.2.(1.0)
9.3.0.0
Usage The following table illustrates the fields displayed in the output of this command:
Information
Field
Link-bundle trigger threshold
Slot
npuUnit
hg-port-channel
Utilization (In Percent)
Alarm State
Interface
Utilization (In Percent)
878
Specify a HiGig port channel on a Z9500 line-card (leaf) NPU
by entering the keyword slot and slot number, then
npuUnit and NPU ID, then hg-port-channel 0. Line-card
slot numbers are 0 to 2; line-card NPU IDs are 0 to 3. The
HiGig port-channel ID is always 0 because there is only one
HiGig link bundle used on a line-card NPU to connect to
SFM NPUs.
Description
Introduced on the Z9500 switch.
Introduced on the Z9000 switch.
Description
Percentage value of link-bundle
bandwidth that serves as the threshold
for marking a link bundle as being
overutilized, triggering link-bundle
monitoring, and generating an SNMP
alarm.
Slot number of a Z9500 line card.
Network processing unit (NPU) ID
number of a HiGig link bundle/port-
channel.
Port-channel number of a HiGig link
bundle.
Percentage of total bandwidth usage
by the traffic transmitted on the HiGig
link bundle.
Indicates whether an alarm has been
generated if uneven traffic distribution
occurs in a HiGig link bundle. Possible
values are Active and Inactive.
Member interface of the specified
HiGig link bundle/port channel in the
format:
slot-id/npu-id:hghigig-port-number
Percentage of total link-bundle
bandwidth used on each member link.
Interfaces