Net - Dell Z9500 Reference Manual

Hide thumbs Also See for Z9500:

Table of Contents

CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

net

To configure an IS-IS network entity title (NET) for a routing process, use this mandatory command. If

you did not configure a NET, the IS-IS process does not start.

net network-entity-title

To remove a net, use the no net network-entity-title command.

entity-title

Not configured.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Intermediate System to Intermediate System (IS-IS)

Introduced on the Z9500.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Specify the area address and system ID for an IS-IS routing

process. The first 1 to 13 bytes identify the area address. The

next 6 bytes identify the system ID. The last 1 byte is the

selector byte, always identified as zero zero (00). This

argument can be applied to an address or a name.