Neighbor Weight; Neighbor X:x:x::x Password - Dell Z9500 Reference Manual

neighbor weight

Assign a weight to the neighbor connection, which is used to determine the best path.
Z9500
Syntax
neighbor {ipv6-address | peer-group-name} weight weight
To remove a weight value, use the no neighbor {ipv6-address | peer-
group-name} weight weight command.
Parameters
ipv6-address
peer-group-
name
weight
Defaults 0
Command ROUTER BGP
Modes
Command
Version
History
9.2(1.0)
8.2.1.0
7.4.1.0
Usage In the software's best path selection process, the path with the highest weight
Information value is preferred.

neighbor X:X:X::X password

Enable TCP MD5 Authentication for an IPv6 BGP peer session.
Z9500
Syntax
neighbor x:x:x::x password {7 <encrypt-pass>|<clear-pass>
To return to the default setting, use the no neighbor x:x:x::x password
command.
Border Gateway Protocol
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Enter the name of the peer group to disable all routers within
the peer group.
Enter a number as the weight. The range is 0 to 65535. The
default is 0.
Description
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
NOTE: Reset the neighbor connection (the clear ip bgp * command) to
apply the weight to the connection and recompute the best path.
529