Router-Id - Dell Z9500 Reference Manual

tag tag-value
Defaults Not configured.
Command
ROUTER OSPF for OSPFv2
Modes
ROUTER OSPFv3 for OSPFv3
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
9.1.(0.0)
8.3.19.0
7.8.1.0
7.4.1.0
Usage
To redistribute the default route (x:x:x:x::x), use the default-information
Information
originate command.
Related
default-information originate
Commands

router-id

Designate a fixed router ID.
Z9500
Syntax
router-id ip-address
To return to the previous router ID, use the no router-id ip-address
command.
Parameters
ip-address
Defaults The router ID is selected automatically from the set of IPv4 addresses configured
on a router.
1320
(OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPFv3.
The range is from 0 to 4294967295
The default is 0.
Description
Introduced on the Z9500.
Introduced support for OSPFv3 on the S4810 and Z9000.
Introduced on the S4820T.
Added support for the C-Series.
Introduced on the E-Series.
– configures default external route into OSPFv3.
Enter the router ID in the dotted decimal format.
Open Shortest Path First (OSPFv2 and OSPFv3)